|
| |
TM 1-1730-231-13&P
CHAPTER 2
OPERATING INSTRUCTIONS
SECTION I. DESCRIPTION AND USE OF OPERATOR'S CONTROLS AND INDICATORS
2-1. Controls and Indicators. Controls and indicators for operation and monitoring of the hydraulic kneeling/erecting
cart are located on the front side of the cart and on the controller which is stowed inside the cabinet. All controls and
indicators are identified in Table 2-1 and located on Figure 2-1.
Table 2-1. Controls and Indicators
ITEM NO.
NOMENCLATURE
FUNCTION OR USE
1
Sight Glass, REMOVE
Hydraulic fluid level till this
FLUID
sight glass indicates that the
reservoir is full about 5-1/2 gal-
lons and fluid should be removed
before further operation.
2
Sight Glass, FULL
Hydraulic fluid in this sight
LEVEL
glass indicates that the reservoir
is full and holds about 4 gallons
fluid.
3
Bleed Adapter
Used during removal of air from
hydraulic hoses.
4
Filter Indicator
When extended red marker visible,
indicates clogged filter.
5
Tall Manual Flow
Controls flow of fluid to/from
Regulator (Needle
helicopter tall strut.
Valve)
6
Left Manual Flow
Controls flow of fluid to/from
Regulator (Needle
helicopter left strut.
Valve)
7
Right Manual Flow
Controls flow of fluid to/from
Regulator (Needle)
helicopter right strut.
Valve)
8
Fluid Pressure Gage
Indicates gear pump output fluid
pressure.
2-1
|
