TM 1-4920-446-13 & P
Wheel assembly - Replace (Contd)
Depress valve in valve stem to allow air to be released from tube.
Remove eight nuts and washer from bolts securing both halves of the rim assembly together.
Remove eight bolts and separate both halves of rim assembly from the tire and tube, being careful not to damage
the valve stem on the tube.
Position both halves of rim assembly on the tire and tube. Align holes being careful not to pinch the tube between
the rim halves or damage the valve stem.
Insert eight bolts in the rim assembly and install eight washers and nuts. Tighten to a torque of 228 in-lbs.
Inflate tire and tube to 60 psi.
END OF TASK