TM 1-4920-448-13&P3-13. Water/Oil Separator Fittings and Air Hose - Replace (Cont)3-13REPLACE AIR HOSE1. Remove both loop clamps (1) from defectivehose (2).2. Slit hose (2) lengthwise from protective cap (3) toend of fitting (4) (approximately 1 1/2 inches) withknife.3. Bend hose(2) back over fitting (4) and snap off withquick tug.4. Repeat Steps 2 and 3 at other end of hose.GO TO NEXT PAGE3 - 14