ALL HYDRAULIC FUNCTIONS INOPERATIVE - Continued
Inspect/test final drive assemblies.
Do final drives appear to be operating normally?
YES - Go to Step (19).
NO - Replace final drive assemblies (TM 5-2350-262-20).
Check if vehicle is operational.
Turn off engine.
Allow engine to cool down.
Perform "Before Operation PMCS" procedures (TM 5-2350-262-10).
Attempt to start and operate vehicle in a normal manner.
Can vehicle be operated in a normal manner?
YES - Verify problem no longer exists.
NO - Notify Supervisor.
END OF WORK PACKAGE