 |
|||
|
|
|||
|
Page Title:
Figure 8. Aircraft hydraulic test stand, left side view. |
|
||
| ||||||||||
|
|
 Pipe nipple
Reservoir fill cap
V-belting
Left front door assembly
10
Left rear door assembly
18
Generator adjusting arm
Elbow
Low pressure filter
Battery terminal adapter, negative
Pipe nipple
12
Manifold
20
Battery fill cap
Engine accessory generator
Battery tray
Bolt
Generator mounting plate
14
Battery
22
Battery terminal adapter, positive
Shielded cable
15
Cover assembly
23
Fuel tank cap
Reservoir
16
Nut (2 rqr)
Warning: Battery electrolyte con-
lockwashers, and 2 flat washers that
tains sulfuric acid and can cause
secure the cover assembly (15) and
severe skin burns. If the electrolyte
battery to the battery tray (13) and
comes in contact with the body, cloth-
remove the battery.
ing, or painted surfaces, rinse imme-
(3) Installation.
diately with clean water.
( a ) Place the battery in the battery
(2) Removal.
tray, mount the cover assembly on
(a) Disconnect the two battery terminal
the battery and secure with the 2
adapters (19 and 33, fig. 8) from
flat washers, and 2 lockwashers, and
the terminals of the battery (14).
2 hex nuts.
(b) Remove the 2 hex nuts (16), 2
(b) Clean all corrosion from the battery
10
AGO 5742A
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals