2-2. In this chapter, Section II; Controls and Instrumentation, will
familiarize the operator of the test
stand with the individual function of operation controls and gages.
Section III; Preliminary Instructions,
will provide necessary instructions before the test stand is actually
started up and used for test. Section
IV; Operating Details, will provide the three modes of operation of
the test stand.
CONTROLS AND INSTRUMENTATION
2-3. CONTROLS AND INSTRUMENTATION. (See figures 2-1 and 2-2.)
2-4. Table 2-1 lists functions of controls, gages and indicators of the main control panel. Table 2-2
lists all controls and their function of the start up panel.
TABLE 2-1. MAIN PANEL CONTROLS, GAGES AND INDICATORS