Quantcast Table 4-3. Hydraulic Performance Checks During System Test

 

Click here to make tpub.com your Home Page

Page Title: Table 4-3. Hydraulic Performance Checks During System Test
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
Table 4-2. Engine Start-up Performance Checks (Cont) - TM-55-4920-405-13-P0053
Up
TM-55-4920-405-13-P Test Stand Hydraulic System Gasoline Engine Driven Type D-5C Manual
Next
Table 4-4. Test Stand Shutdown Performance Checks
TM 55-4920-405-13&P
Table 4-3. Hydraulic Performance Checks During System Test
I
Abnormal
Corrective
Action
Action
Indication
Step
Repair or replace.
COMPENSATOR SHUT-
COMPENSATOR
1
Turn COMPENSA-
SHUTOFF VALVE
OFF VALVE cannot be
TOR SHUTOFF
closed because it is
can be closed.
VALVE (17, fig-
defective,
ure 2-1) slowly
CW to close.
2
a. Close COMPENSATOR
Desired GPM cannot be
Adjust VOLUME
FLOW INDICA-
SHUTOFF VALVE .
o b t a i n e d ,  Probable
control (14, figure
TOR GPM reads
b. Add hydraulic fluid to
2-1) as needed to
desired GPM.
cause:
reservoir.
obtain desired
COMPENSATOR
a.
c Replace low pressure
GPM flow reading
SHUTOFF VALVE
filter.
on FLOW INDI-
not fully closed.
CATOR GPM (11,
b.  Hydraulic fluid
level too low,
c .  Low pressure filter
clogged, as shown
by lighting of LP
P indicator (20,
3
Set HIGH PRESS
HIGH PRESS BY-
HIGH PRESS BYPASS
Repair or replace.
PASS VALVE can
BYPASS VALVE
VALVE cannot be
control (19, fig-
closed because valve
be closed.
is defective,
CLOSED.
4
FLUID PRESSURE
FLUID PRES-
Adjust HIGH
Adjust, repair or replace
GAGE reading is much
valve.
SURE GAGE (5,
PRESS RELIEF
higher than specified,
VALVE (18, fig-
ure 2-1) to re-
Probable cause:
about 200 PSI
above pressure
HIGH PRESS RELIEF
lieve pressure at
needed by sys-
V A L V E incorrectly
about 200 PSI
tem to be tested.
adjusted or defective.
above pressure
needed by system
to be tested.
5
Turn COMPEN-
FLUID PRES-
COMPENSATOR SHUT-
Repair or replace valve.
SATOR SHUTOFF
SURE GAGE (5,
OFF VALVE cannot be
opened because it is
VALVE (17, fig-
ure 2-1) fully
ing drops to be-
defective.
low 1000 PSI.
CCW to open.
D e s i r e d pressure read-
6
Repair or replace PRES-
Adjust PRES-
FLUID PRES-
a.
ing cannot be obtained.
SURE COMPEN-
SURE  COMPENSATOR.
SURE GAGE (5,
T e s t , service, repair or
Probable cause:
b.
SATOR (16, fig-
replace pump.
reads desired
a . Defective PRES-
c . Replace defective gage.
obtain desired
s y s t e m pressure.
SURE COMPEN-
s y s t e m pressure.
SATOR.
b. Defective hydraulic
pump,
c. Defective FLUID
PRESSURE GAGE .
7
a. (1) Repair
or replace de-
Turn FLOW CON-
a. FLUID PRESSURE
FLUID PRES-
fective
valve.
GAGE reads higher
TROL VALVE
SURE GAGE (5,
(2) Adjust
or replace de-
than selected sys-
fective
valve.
fully CCW to open.
tem pressure plus
reading stays at
200 PSI. Probable
or below value
cause:
set in step 4.
4-6

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc.
6230 Stone Rd, Unit Q Port Richey, FL 34668

Phone For Parts Inquiries: (727) 493-0744
Google +