Removal of Crankshaft
Removal of Tappets and Camshaft
See figure 4-24 for proper clear-
Check to see whether your engine
ances. Mount the pistons as
uses case-ground pistons or
shown in figure 4-25.
s p l i t - s k i r t pistons. On a cam-
Make sure that you install the pis-
ground piston, the piston skirt is
ton and connecting rod assemblies
cam-ground to an elliptical con-
in the same bores from which you
t o u r . Clearance between the pis-
removed them. Oil the pistons,
ton and cylinder must be measured
rings, wrist pins, rod bearings.
at the center of the thrust face at
and cylinder walls before assembly.
the bottom of the piston skirt.