REASSEMBLY - HIGH PRESSURE FILTER

TM 55-4920-442-13 & P

3-80.

Filter assemblies - Replace ( cont.)

3-80

REASSEMBLY - HIGH PRESSURE FILTER

1. Install filter(s).

2. Install packing, back-up ring and bowl onto filter head.

3. Install packing and drain plug.

4. Install packing and bleeder plug.

5. Install U bolt and nuts to mounting bracket.

DISASSEMBLY LOW PRESSURE FILTER

1. Remove bolt, washer, nut and bracket.

2. Drain filter by opening drain plug on bottom of unit.

3. Remove bolt, washer, nut, clamping ring, packing and cover.

4. Remove wing nut, seal retainer and top gasket.

5. Remove top element, middle gasket, bottom element and bottom gasket.

GO TO NEXT PAGE

3-124