|
| |
TM 1-1730-231-13&P
3-35. INDICATOR LIGHT AND SWITCHES - Continued
3-35
A.
INSPECTION
1.
Check indicator light (1), switches (2 and 3), and boots (4) for physical damage.
2.
With power applied, check for burned out light.
B.
SERVICE
1.
Remove four screws (5) and raise cover of control box (6) carefully.
2.
Tighten mounting hardware.
3.
Tighten terminal screws.
4.
Replace burned out light.
C.
REMOVAL
1.
Remove four screws (5) and raise cover of control box (6) carefully.
NOTE
Tag all disconnected wiring to ease reinstallation.
2.
Disconnect wiring from indicator light (1) and switches (2 and 3).
3.
Remove attaching hardware and remove indicator light and switches.
D.
INSTALLATION
1.
Install Indicator light (1) and switches (2 and 3) with attaching hardware in control box (6).
2.
Connect wiring using electrical schematic and wiring diagram, Figures 1-4 and 1-5 and tags as a guide.
3.
Install control box cover with four screws (5).
END OF TASK
3-55
|
