|
| |
TM 1-4920-446-13 & P
3-71. Fluid reservoir - Replace (Contd)
3-71
INSTALLATION
NOTE
The reservoir drain valve protrudes under the frame. When moving the reservoir be
careful not to damage the reservoir drain valve.
1.
Position reservoir (1) in test stand.
2.
Install four mounting bolts, washers, and nuts (15).
3.
Connect sending unit wire (13).
4.
Connect 2 hydraulic lines at elbows (2 and 3) on bottom of reservoir.
5.
Connect return line at elbow (11) on side of reservoir.
6.
Refill reservoir to 3/4 full of hydraulic fluid, MIL-H-83282.
END OF TASK
3-91
|
