|
| |
TM 1-4920-446-13 & P
3-74. Filter assemblies - Replace (Contd)
3-74
Disassembly:
1.
Remove "T" fittings and reducers from input and output sides of filter.
2.
Discard defective filter.
Assembly:
NOTE
Antiseize tape shall be applied to male threads prior to installation of fittings. Ensure
tape does not cover the first thread. All connections should be tightened as necessary
to reclude leakage of hydraulic fluid.
1.
Use antiseize tape, MIL-T-27730, on all hydraulic connections.
2.
Install reducers and "T" fittings into input and output sides of filter.
Installation:
1.
Position filter and attach to chassis using four bolts.
2.
Connect input and output hydraulic tubing/lines.
3.
Pressurize system and check for leaks.
END OF TASK
3-97
|
