|
| |
TM 1-4920-446-13 & P
3-21.
Axles and steering assembly - Service
3-21
This task covers: Service
INITIAL SETUP
Tools:
Tool Set, AVUM Set No. 2 NSN 4920-00-567-0476
Material Required:
Grease - MIL-G-10924
Personnel Required:
MOS 67
SERVICE:
1.
Apply grease MIL-G-10924 to lube fittings on steering assembly with grease gun as indicated in figure 3-1. (7 points)
2.
Apply MIL-G-10924 grease to spring and shackle attaching bolts 3 front and 3 rear (see Figure 3-1).
3.
Tighten loose hardware and replace missing hardware as required.
END OF TASK
3-20
|
