|
| |
TM 1-4920-448-13&P
3-13. Water/Oil Separator Fittings and Air Hose - Replace (Cont)
3-13
5. Slide loop clamps (1) over new hose (2).
6. Replace fittings, if required, before proceeding to
step 7.
7. Push hose (2) onto fitting (4) until end bottoms
underneath protective cap (3).
8. Repeat Step 7 for other end of hose.
9. Install loop clamps (1) in original position and
secure.
END OF TASK
3-15
|
