TM 5-2350-378-23&P
0003
Right Pump Control Valve (13R)
Receives oil flow from the main hydraulic pump and maintains pressure at 3,950-4,050 psi (27,235-27,925 kPa) for
the right-side hydraulic functions (Figure 4).
Left Pump Control Valve (13L)
Receives oil flow from the main hydraulic pump and maintains pressure at 3,950-4,050 psi (27,235-27,925 kPa)
(Figure 4).
Right Suspension Control Valve (3R/17R)
Port 3R (Figure 4), front bottom of valve, raises the right front-side of vehicle. Port 17R (Figure 4), above port 3R
(Figure 4), lowers right front-side of vehicle. Relief valve is set at 3,450-3,550 psi (23,788-24,477 kPa).
Left Suspension Control Valve (3L/17L)
Port 3L (Figure 4), front bottom of valve, raises the left front-side of vehicle. Port 17L (Figure 4), above port 3L
(Figure 4), lowers left front-side of vehicle. Relief valve is set at 3,450-3,550 psi (23,788-24,477 kPa).
Apron Raise/Lower Control Valve (19/20)
Port 19 (Figure 4), front top of valve, actuates circuit and raises apron. Port 20 (Figure 4), below port 19 (Figure 4),
actuates circuit and lowers apron. Relief valve No. 19 (Figure 4) is set at 4,450-4,550 psi (30,688-31,372 kPa) and
relief valve No. 20 (Figure 4) is set at 1,950-2,050 psi (13,445-14,135 kPa).
Winch Control Valve (C1/C2)
Port C1 (Figure 4), front bottom of valve, actuates circuit, moves cable out of winch C2 (Figure 4), above port C1
(Figure 4), and brings cable into winch. Relief valve is set at 1,950-2,050 psi (13,445-14,135 kPa) on the winch.
Ejector Control Valve (21/22)
Port 21 (Figure 4), front top of valve, actuates circuit and moves ejector forward. Port 22 (Figure 4), below port 21
(Figure 4), actuates and moves the ejector back. Relief valve is set at 1,950-2,050 psi (13,445-14,135 kPa).
0003-6
03/15/2011Rel(1.8)root(thrywp)wpno(G00003)
