TM 5-2350-378-23&P
0039
INSTALLATION
WARNING
Do not operate ejector when personnel are in bowl. Do not work in bowl unless ejector
lock is engaged. Failure to comply may result in severe injury or death to personnel.
Do not stand or work in bowl area unless ejector lock is engaged. Do not stand in bowl
to observe roller guide travels. Failure to comply may result in severe injury or death to
personnel.
When folding dozer blade, work on blade latches from side of vehicle only. Do not stand
in front of dozer blade while retracting ejector. Failure to comply may result in severe
injury or death to personnel.
1.
Install new O-ring (Figure 3, Item 4) and adapter (Figure 3, Item 3) into filter (Figure 3, Item 5).
2.
Install tee (Figure 3, Item 11) on adapter (Figure 3, Item 3) and adapter (Figure 3, Item 1) onto top of tee
(Figure 3, Item 11).
3.
Install bypass hose (Figure 3, Item 2) onto adapter (Figure 3, Item 1).
4.
Install new O-ring (Figure 3, Item 4) with adapter (Figure 3, Item 3) on top of valve V21 (Figure 3, Item 10).
5.
Install valve V21 (Figure 3, Item 10), new O-ring (Figure 3, Item 4), two flat washers (Figure 3, Item 7), adapter
(Figure 3, Item 9), and nut (Figure 3, Item 6) on bulkhead bracket (Figure 3, Item 8) and tee
(Figure 3, Item 11).
0039-6
03/15/2011Rel(1.8)root(maintwp)wpno(M00013)