|
|
SECTION II (Con't.)
(E) Oil Filter.
Loosen the bolt and remove the cover from the oil
(1)
filter.
(2)
Remove the cartridge from inside the filter and
discard.
Wipe the inside of the filter with a lint-free cloth
(3)
making sure all dirt and sludge are removed.
Insert a new cartridge In the filter body. Be sure
(4)
the correct end of the cartridge is up.
Install a new gasket in the cover. Place the cover
(5)
on the oil filter and tighten the bolt.
Add one quart of oil to the engine crankcase to compen-
(6)
sate for oil lost in servicing the oil filter.
Refer
to lubrication chart table 1 for the proper grade oil.
Operate the unit immediately after servicing.
(7)
(F)
Air Cleaner.
(1) Remove the air intake cap
(2) Loosen the thumbscrew and remove the oil cup from the
air cleaner assembly.
(3) Discard the oil in the oil cup. Wash the oil cup and
air intake in an approved cleaning solvent and dry
thoroughly.
(4) Fill the oil cup to the level mark with clean oil of
the proper grade.
Refer to the lubrication chart table
1.
Install the oil cup on the air cleaner body and
tighten the thumbscrew to secure.
-38-
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |