 |
|||
|
|
|||
|
Page Title:
TABLE 3-2. INTERMEDIATE INSPECTION REQUIREMENTS (cont) |
|
||
| ||||||||||
|
|
 TM 55-4920-373-14&P
TABLE 3-2. INTERMEDIATE INSPECTION REQUIREMENTS (cont)
INTERMEDIATE
REQUIREMENT
ITEM
INSPECTION
Tighten loose mounting nuts
V o l t a g e regulator-
and connections. Adjust or
(cont)
replace a defective regulator
50 hrs
Inspect control panel for s e c u r e
Control panel
mounting of shock mounts.
Insure presence of shock
mounts
50 hrs
Examine the condition of all
Gages and meters
gages. See that all gages
indicate correctly and that the
glass is not cracked or broken.
Tighten loose mounting screws
and connections. Replace any
defective or damaged gage
See that all meters are securely
mounted and operating properly
and that the glass is not cracked
or the indicators are not bent
or broken. Tighten loose
mounting screws and replace
any defective or damaged meter
50 hrs
Inspect all control valves for
Control valves
packing leaks and proper opera-
tion. See that handwheels are
securely mounted
Tighten packing or replace as
required. Replace a defective
or damaged control valve
50 hrs
Inspect all tires for under-
Tires
inflation, abnormal or uneven
wear, cuts, embedded foreign
matter, and missing valve caps.
Remove any foreign matter
from tires. See that tires are
inflated to correct pressure and
all valve caps are in place
50 hrs
Inspect for loose wheel mount-
Wheels
ing bolts. Inspect wheel bear-
ings for proper adjustment.
Tighten loose wheel bolts and
adjust wheel bearings as re-
quired
50 hrs
Inspect the axle assemblies for
Axle
secure mounting and proper
alinement. Inspect the springs
for cracks, breaks and weaken-
ed condition. Tighten all axle
mounting bolts. Aline the front
wheels as required. Replace
defective springs
3-10
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals