 |
|||
|
|
|||
|
Page Title:
TABLE 3-3. PERIODIC INSPECTION REQUIREMENT (cont) |
|
||
| ||||||||||
|
|
 TM 55-4920-373-14&P
TABLE 3-3. PERIODIC INSPECTION REQUIREMENT (cont)
PERIODIC
REQUIREMENT
INSPECTION
ITEM
Inspect control panel for secure
100 hrs
Control panel
mounting of shock mounts.
Insure presence of shock mounts
Examine the condition of all
100 hrs
Gages and meters
gages. See that all gages indi-
cate correctly and that the glass
is not cracked or broken
Tighten loose mounting screws
and connections. Replace any
defective or damaged gage
See that all meters are securely
mounted and operating properly
and that the glass is not cracked
or the indicators are not bent
or broken
Tighten loose mounting screws
and replace any defective
or damaged meter
Inspect all control valves for
100 hrs
Control valve
packing leaks and proper opera-
tion. See that handwheels are
securely mounted. Tighten
packing or replace as re-
quired. Replace a defective
or damaged control valve
100 hrs
Inspect all tires for under
Tires
inflation, abnormal or uneven
wear, cuts, embedded foreign
matter } and missing valve caps
Remove any foreign matter from
tires. See that tires are in-
flated to correct pressure and
all valve caps are in place
Inspect for loose wheel mounting
Wheels
100 hrs
bolts. Inspect wheel bearings
for proper adjustment
Tighten loose wheel bolts and
adjust wheel bearings as
required
100 hrs
Inspect the axle assemblies for
Axle
secure mounting and proper
alinement. Inspect the springs
for cracks, breaks and weak-
ened condition
Tighten all axle mounting bolts.
Aline the front wheels as re-
quired. Replace defective
springs
3-14
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals