|
| |
TM 9-5130-338-12&P
CHAPTER 4
UNIT MAINTENANCE INSTRUCTIONS
CHAPTER OVERVIEW
This chapter provides maintenance instructions which unit maintenance is authorized and required to perform. This
chapter is divided into six major sections:
Section I.
Repair Parts; Special Tools; Test, Measurement, and Diagnostic
Equipment (TMDE); and Support Equipment . ............................................................................ 4-1
Section II.
Service upon Receipt ................................................................................................................. 4-1
Section III. Unit Maintenance Preventive Maintenance Checks and Services (PMCS) ................................. 4-2
Section IV. Unit Maintenance Troubleshooting Procedures .......................................................................... 4-4
Section V.
Unit Maintenance Procedures . ................................................................................................... 4-6
Section VI. Preparation for Storage or Shipment ........................................................................................ 4-23
Section I. REPAIR PARTS, SPECIAL TOOLS, TMDE, AND SUPPORT
EQUIPMENT
4-1. COMMON TOOLS AND EQUIPMENT.
For authorized common tools and equipment, refer to the Modified Table of Organization and Equipment (MTOE)
applicable to your unit.
4-2. SPECIAL TOOLS, TMDE, AND SUPPORT EQUIPMENT.
Special tools, TMDE, and support equipment are not required to maintain the hydraulic impact wrench.
4-3. REPAIR PARTS.
Repair parts are listed and illustrated in Appendix D. Mandatory replacement parts are listed in Appendix F.
Section II. SERVICE UPON RECEIPT
4-4. CHECKING UNPACKED EQUIPMENT.
a.
Inspect equipment for damage incurred during shipment. If equipment has been damaged, report damage on SF
Form 368, Product Quality Deficiency Report.
b.
Check equipment against packing slip to see if shipment is complete. Report all discrepancies in accordance
with DA PAM 738-750.
4-5. PROCESSING UNPACKED EQUIPMENT.
a.
Clean hydraulic impact wrench.
4-1
|
