|
| |
TM 9-5130-338-12&P
CHAPTER 1
INTRODUCTION
CHAPTER OVERVIEW
This chapter introduces the operator and unit maintenance personnel to the hydraulic impact wrench model IW-12-140T
(PN 12322630). This chapter is divided into three major sections:
Section I
General Information ...................................................................................................1-1
Section II
Equipment Description and Data ................................................................................1-3
Section III
Principles of Operation ..............................................................................................1-4
Section I. GENERAL INFORMATION
1-1. SCOPE.
This manual contains instructions for the operator and
unit maintenance personnel for the hydraulic impact
wrench model IW-12-140T (PN 12322630). It contains
descriptions of and procedures for removal, inspection,
repair, test, and lubrication, as well as a Maintenance
Allocation Chart (MAC) and repair parts list.
1-2. MAINTENANCE FORMS, RECORDS, AND
REPORTS.
Department of the Army forms and procedures used for
equipment maintenance will be those prescribed by DA
PAM 738-750 as contained in the Maintenance
Management update. No forms other than those
approved for the Department of the Army will be used.
The reports necessary to comply with the Army safety
program are listed in AR 385-40. These reports are
required whenever accidents involving personnel or
damage to materiel occur.
1-3. DESTRUCTION OF ARMY MATERIEL TO
PREVENT ENEMY USE.
For information and conditions under which destruction
of the hydraulic impact wrench should be undertaken to
prevent enemy use, and for methods of destruction,
refer to TM 750-244-6.
1-1
|
