|
| |
TM 9-6115-667-13&P
SPECIAL TOOLS AND TEST EQUIPMENT
No special tools are required for general maintenance or general disassembly or re-assembly. Typical electrical test
equipment such as an Ohm Meter and Voltage Meter and typical hydraulic test equipment such as a flow and pressure
tester may be required to perform specific diagnostic tests.
PACKAGING
The hydraulic motor generator will be packaged Level A/B in accordance with Army Master Data File (AMDF) Packaging.
MIL-STD-2073-1 (DOD Materiel Procedures for Development and Application of Packaging Requirements) and MIL-STD-
20732 (Packaging Requirement Codes) will be used when data is unavailable in AMDF Packaging. Depot repairables will
be packaged Level A/A. Marking shall be in accordance with MIL-STD-129. Packaging is required when the item is
returned to supply system.
ADMINISTRATIVE STORAGE
Placement of equipment in administrative storage should be for short periods of time when a Shortage of maintenance
effort exists. Items should be in mission readiness within 24 hours or within the time factors as determined by the directing
authority. During the storage period appropriate maintenance records will be kept.
Before placing equipment in administrative storage, current maintenance services and equipment serviceable criteria
(ESC) evaluations should be completed, shortcomings and deficiencies should be corrected, and all modification work
orders (MWO’s) should be applied.
Storage site selection. Inside storage is preferred for items selected for administrative storage. If inside storage is not
available, trucks, vans, conex containers and other containers may be used.
WARRANTY
The hydraulic motor generator and its parts are warranted against defects in materials and workmanship for a period of 12
months from the date of purchase. Exceptions are cutting parts, steels, and other parts (such as impact mechanisms,
regulators, and hoses), and parts subject to normal wear and tear (such as o-rings, saw blades, and other parts that
become worn through normal use of the tool).
The Warranty Registration Card packed with the hydraulic motor generator must be filled out and returned to the
manufacturer upon receipt of the tool.
The manufacturer reserves the right to replace or repair only those parts which under our examination prove to have been
defective at the time of purchase.
Shipping charges are prepaid by the customer unless otherwise authorized by the manufacturer.
The warranty is void if maximum flow and pressure ratings are exceeded.
Report all defects in material or workmanship to your supervisor who will take appropriate action.
Reporting Equipment Improvement Recommendations (EIRs). If your hydraulic motor generator needs
improvement, let us know. Send us an EIR. You, the user, are the only one who can tell us what you
don’t like about your equipment. Let us know why you don’t like the design or performance. Put it on an
SF 368 (Product Quality Deficiency Report). Mail it to: Commander, US Army Aviation and Troop
Command, ATTN: AMSAT-I-MDO, 4300 Goodfellow Blvd., ST. Louis, MO 63120-1798. We’ll send you a
reply.
2
|
