|
| |
TM 1-4920-446-13 & P
3-22.
Axles and steering assembly - Replace (Contd)
3-22
3.
Support radius rod then raise axle and attach to spring assembly with bolts and nuts.
4.
Install cotter pins in bolts connecting axle to spring.
5.
Attach radius rod clamps.
6.
Remove small jacks from under axle.
7.
Attach the two short brake rods, one at each side.
8.
If only replacing rear axle, lower test stand to ground and remove jack stands.
END OF TASK
3-24
|
