drive shaft with a wrench while applying hydraulic
pressure. Turn the shaft both with and against the
hydraulic pressure until the Hyrevz motor starts and runs
Place the Hyrevz motor (31, figure 2) in a
softjawed vise. Install the Hyrevz motor on the motor
adapter plate (30) using the two 5/16-18 x 3/4 inch/i 19
mm long capscrews (28).
Secure the motor adapter plate (30) to the
inboard engine end adapter (26) using the four 3/816 x 2
inch/51 mm long capscrews (25), 3. Perform steps 1
through 8 of the ROTOR REPLACEMENT procedure to
complete the reassembly.
ENVIRONMENTS EVERY 90 DAYS
If the unit is operated or stored in a dirty, moist, or salt
moisture environment the electrical contacts, rotor, and
stator should be inspected and cleaned every 90 days or
as deemed necessary.
If the unit is operated or stored in a clean and dry
environment the electrical contacts, rotor, and stator
should be inspected and cleaned every 12 months or as
No other preventative maintenance is required.