|
| |
TM 1-1730-231-13&P
3-13. WHEEL
3-13
This task covers:
A. INSPECTION
B. SERVICE
C. REMOVAL
D. INSTALLATION
INITIAL SETUP
Tools
Tool Kit, Aircraft Mechanics General, NSN 5180-00-323-4692
Grease Gun
Block, Wooden
Materials
Grease, MIL-G-10924
Personnel Required
MOS 67
A.
INSPECTION
1.
Check tires for cuts, defects, and wear.
2.
Check tires for any object imbedded in the treads.
B.
SERVICE
Using grease gun, apply grease to fitting on wheel.
C.
REMOVAL
1.
Set cart on wooden block to ease removal of wheel.
2.
Remove screw (1) and flat washer (2) from wheel (3).
3.
Remove wheel from axle bar (4). Remove spacer (5) from axle bar (4).
D.
INSTALLATION
1.
Install spacer (5) on axle bar (4) till as far as it will go.
2.
Install wheel (3) on axle bar (4).
3.
Secure wheel with flat washer (2) and screw (1).
END OF TASK
3-10
|
