|
| |
TM 1-4920-446-13 & P
Table 3-2. Intermediate Inspection Requirements (Contd)
Item
Period
Requirements
Wheels
Axle
Brake assembly
High pressure filter assembly
Oil temperature switch
Low pressure filter assembly
50 hour
50 hour
50 hour
50 hour
50 hour
50 hour
ter Replace cut or worn tires. Ensure
that all tires are inflated to correct
pressure (60 PSI) and that all valve
caps are in place.
Inspect for loose wheel mounting
bolts. Inspect wheel bearings for
proper adjustment. Tighten loose
wheel bolts and adjust wheel bearings
as required.
Inspect axle assemblies for loose
mounting and misalignment. Inspect
springs for cracks, breaks, and weak-
ened condition. Tighten all axle
mounting bolts. Align front wheels as
required. Replace defective springs.
Check brake assembly for unsatisfac-
tory braking action. Check brake rods
for loose mounting. Tighten all brake
assembly mounting hardware and ad-
just brakes as required.
Inspect filter assembly for dirty or
clogged condition causing excessive
pressure drop. Replace dirty or
clogged filter element.
Inspect switch for security and loose
mounting. Replace inoperative or
damaged switch.
Inspect filter assembly for dirty or
clogged condition causing excessive
pressure drop. Replace dirty or
clogged filter element.
3-7
|
