|
| |
TM 1-4920-446-13 & P
Table 3-4. Daily Servicing
System
Component
Requirements
Hydraulic
Reservoir (Figure 1-2)
Check reservoir fluid level.;
Add hydraulic fluid as
necessary.
Access door hinges
Check for free movement.
Lubricate, if needed (Table 3-5)
Draw bar
Check for free movement.
Lubricate, if needed (Table 3-5)
Table 3-5. Lubricants
Draw bar: assembly and latch
VV-L-800
Door hinges and latches
VV-L-800 ~
Wheel bearings
MIL-G-10924
Tie rod ends
MIL-G-10924
Brake assy yokes
VV-L-800
Spring bolt lube fitting
(front and rear)
MIL-G-10924
Steering arm center pin
MIL-G-10924
Electric Motor
MIL-L-15719
3-12. Lubrication. Lubrication of test stand components and assemblies should be performed in accordance with Figure
3-1, and Table 3-4.
3-9
|
