|
| |
TM 1-4920-448-13&P
b. Connecting Water Supply.
1. Remove protective dust cap (1) from each end
of water feed thru connector (2). Store in shop storage
chest.
2-18
2. Install adapters and fittings as required.
c. Connecting Hydraulic Supply. Hydraulic con-
nections are made only when hydraulically operated
equipment is to be used.
1. Remove protective dust cap (1) from hydraulic
inlet quick-disconnect coupling (2) on shop’s services
utility panel (3).
2. . Remove protective dust cap (4) from return
quick disconnect coupling (5).
|
