|
| |
TM 1-4920-448-13&P
b. Disconnecting Water Supply
c. Disconnecting Compressed Air.
1. Remove male quick-disconnect coupling (1)
from the air inlet nipple (2) at service utility panel.
Store in shop storage chest.
2. Obtain a dust cap (3) from storage chest.
1. Obtain two protective dust caps (1) from shop
storage chest.
2. Remove adapters and fittings from connector
(2) at service panel.
3. Install dust cap on each end of feed thru
connector (2), tighten securely.
3. Install dust cap (3) on air inlet nipple (2),
tighten securely.
2-20
|
