TM 3-5180-210-15
item, is the total quantity of items authorized for the
f. 15-Day Organizational Maintenance Allowances.
number of equipments supported.
Subsequent
(1) The allowance columns are divided into
appearances of the same item will have the letters
four subcolumns. Indicated in each subcolumn opposite
"REF" in the allowance column.
the first appearance of each item is the total quantity of
Items authorized for use as required but not for stockage
items authorized for the number of equipments
are identified with an asterisk in the allowance column.
supported. Subsequent appearances of the same item
(2) The quantitative allowances for DS/ GS
will have the letters "REF" in the allowance columns.
levels of maintenance will represent initial stockage for
Items authorized for use as required but not for initial
a 30-day period for the number of equipments
stockage are identified with an asterisk in the allowance
supported.
column.
(3) Determination of the total quantity of parts
(2) The
quantitative
allowances
for
required for maintenance of more than 10 of these
organizational level of maintenance represents one
equipments can be accomplished by converting the
initial prescribed load for a 15-day period for the number
equipment quantity to a decimal factor by placing a
of equipments supported.
Units and organizations
decimal point before the next to last digit of the number
authorized additional prescribed loads will multiply the
to indicate hundredths and multiplying the decimal
number of prescribed loads authorized by the quantity of
factor by the parts quantity authorized in the 51-100
repair parts reflected in the density column to obtain the
allowance column. Example, authorized allowance for
total quantity of. repair parts authorized.
51-100 equipment is 40; for 150 equipments, multiply 40
(3) Organizational
units
providing
by 1.50 or 60 parts required.
maintenance for more than 100 of these equipments
h. 1-Year Allowance Per 100 Equipments/
shall determine the total quantity of parts required by
Contingency Planning Purposes. Indicates opposite the
converting the equipment quantity to a decimal factor by
first appearance of each item the total quantity required
placing a decimal point before the next to last digit of
for distribution and contingency planning purposes. The
the number to indicate hundredths, and multiplying the
range of items indicates total quantities of all authorized
decimal factor by the parts quantity authorized in the 51-
items required to provide for adequate support of 100
100 allowance column. Example, authorized allowance
equipments for one year.
for 51-100 equipments is 40; for 150 equipments
multiply 40 by 1.50 or 60 parts required.
i. Depot Maintenance Allowance Per 100
Equipments. Indicates opposite the first appearance of
(4) Subsequent changes to allowances will be
each item, the total quantity authorized for depot
limited as follows: No change in the range of 'items is
maintenance of 100 equipments.
Subsequent
authorized.
If additional items are considered
appearances of the same item will have the letters
necessary, recommendation should be forwarded to:
"REF" in the allowance column. Items authorized for
Commanding Officer, Edgewood Arsenal, ATTN:
use but not for initial stockage are identified with an
SMUEA-TSE-TP, Edgewood Arsenal, Maryland 21010,
asterisk in the allowance column.
for exception or revision to the allowance list. Revisions
to the range of items authorized will be made by
j. Illustration.
Edgewood Arsenal based upon engineering experience,
(1) Figure number. Indices the figure number
demand data, or TAERS information.
of the illustration in which the item is shown.
g. 30-Day DS/GS Maintenance Allowances.
(2) Item number.
Indicates the callout
Note. Allowance in GS column are for
number used to reference the item in the illustration.
GS maintenance only.
(1) The allowance columns are divided into
4. Special Information
three subcolumns.
Indicated in each subcolumn,
a. This equipment is issued to Depot Maintenance
opposite the first appearance of each
organizations. However, maintenance
45
