Appendix C: REPAIR PARTS AND SPECIAL TOOLS LIST

TM 55-1730-202-14

APPENDIX C

REPAIR PARTS AND SPECIAL TOOLS LIST

SECTION I. INTRODUCTION

C-1. Scope. This RPSTL lists and authorizes spares and repair parts; special tools; special test,

measurement, and diagnostic equipment (TMDE); and other special support equipment required for per-

formance of Operator, Aviation Unit and Aviation Intermediate maintenance of the Tripod Hydraulic

Jack. It authorizes the requisitioning, issue, and disposition of spares, repair parts and special tools as

indicated by the source, maintenance and recoverability (SMR) codes.

C-2. General. In addition to Section I, Introduction, this Repair Parts and Special Tools List is divid-

ed into the following sections:

a. Section II. Repair Parts List. A list of spares and repair parts authorized by this RPSTL for

use in the performance of maintenance. The list also includes parts which must be removed for replace-

ment of the authorized parts. Parts lists are composed of functional groups in ascending alphanumeric

sequence, with the parts in each group listed in ascending figure and item number sequence. Bulk

materials are listed in item name sequence. Repair parts kits are listed separately in their own func-

tional group within Section II. Repair parts for repairable special tools are also listed in this sec-

tion. Items listed are shown on the associated illustration (s)/figure (s).

b. Section III. Special Tools List. A list of special tools, special TMDE, and other special sup-

port equipment authorized by this RPSTL (as indicated by Basis of Issue (BOI) information in

DESCRIPTION AND USUABLE ON CODE column) for the performance of maintenance. (Not ap-

plicable).

c. Section IV. National Stock Number and Part Number Index. A list, in National Item Iden-

tification Number (NIIN) sequence, of all National stock numbered items appearing in the listing,

followed by a list in alphanumeric sequence of all part numbers appearing in the listings. National

stock numbers and part numbers are cross-referenced to each illustration figure and item number ap-

pearance.

C-3. Explanation of Columns (Sections II and III.

a. Item No. (Column (1)). Indicates the number used to identify items called out in the illustra-

tion.

b. SMR Code (Column (2)). The Source, Maintenance, and Recoverability (SMR) code is a 5-

position

code containing supply/requisitioning information, maintenance category authorization

criteria, and disposition instruction, as shown in the following breakout:

Change 5