|
|
TM 55-1730-208-13
Section VI. REPAIR AND REPLACEMENT OF AUTHORIZED PARTS
3-18. Introduction.
This section contains organizational instructions
required to remove, disassemble, clean, inspect, repair,
test, adjust, align, service, and replace the clamp
assembly, pump assembly, cylinder and ram assembly,
foot assemblies, and tripod assembly authorized by
appendix B, maintenance Allocation Chart.
3-19. Removal.
Remove the clamp assembly, pump assembly,
cylinder and ram assembly, foot assemblies and tripod
assembly as follows:
3-20. Clamp Assembly.
a. Disconnect hose at pump assembly and drain
hydraulic fluid into a suitable container.
b. Release cam handle (5, figure 3-11 from lug at
upper end of reservoir of pump assembly.
c. Remove pump assembly from hydraulic jack.
AV 010005
d. Remove wing nut (1) from eyebolt (9).
e. Separate front half clamp (6) and rear half
Figure 3-1. Clamp Assembly-Exploded View.
clamp (7). Remove clamp assembly.
3-21. Pump Assembly.
a. Remove pump assembly from hydraulic jack in
accordance with paragraph 3-20, steps a through b.
pump handle (1) from pump handle socket (5).
FIGURE &
QTY
USABLE
INDEX
PART
DESCRIPTION
PER
ON
NO.
NO.
1234567
ASSY
CODE
3-1-
50B25223
CLAMP ASSEMBLY, Jack ..............................................
1
-1
42A13046-3
.
NUT, Wing (80049) ..................................................
1
-2
42A13049
.
BOLT, Cam (80049) .................................................
1
-3
AN960-816
.
WASHER, Flat .........................................................
1
-4
MS35338-48
.
WASHER, Lock ........................................................
-5
42B13048
.
HANDLE, Cam .........................................................
1
-6
50C25240
.
CLAMP, Front half (80049) .......................................
1
-7
50B25242
.
CLAMP, Rear half (80049) .......................................
1
-8
AN435-10-20P
.. RIVET (88049) .........................................................
1
-9
.. BOLT, Eye (80049)...................................................
1
3-6
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |