Operation in Dusty or Sandy Areas.

SECTION I (Con't.)

1-50

Operation in Dusty or Sandy Areas.

(A) Lubricate the test stand in accordance with the lubricat-

ion chart. Keep lubricants, grease gun, oil containers

and fittings clean.

(B) Protect the test stand from dust and sand as much as

possible. Keep the unit clean and free of foreign matter.

(C) Cover the unit with a tarpaulin when not in use.

(D) If possible, wet down the area surrounding the operating

site to keep down dust and sand.

(E) Clean the engine air cleaner every 2 to 4 hours.

1-51

Operation Under Rainy or Humid Conditions.

Lubricate the test stand in accordance with the lubricatin

(A)

chart.

Keep the fuel tank full to prevent accumulation of conden-

(B)

sation.

Keep electrical components clean and dry. Watch closely

(C)

for evidence of fungus growth and remove promptly.

Cover the test stand with a tarpaulin or similar protection

(D)

when not in use.

1-52

Operation on Salt Water Areas.

(A) Lubricate the test stand in accordance with the lubricat-

ion chart.

(B) Wipe all exposed areas frequently. Clean off salt water

deposits with clear water and wipe dry.

(C) Coat all exposed machined metal surfaces with a thin film

of oil.

(D) Retouch or repaint damaged paint surfaces to prevent

-34-