Operation in Extreme Cold.

SECTION I (Con't.)

(B) Close and secure all doors and release the brake lever

assembly.

(C) Attach the drawbar assembly to the prime mover and tow

the test stand to the new work site.

CAUTION:

MAXIMUM ALLOWABLE TOWING SPEED IS 20 MPH OVER

SMOOTH PAVED SURFACES.

(D) Set up the test stand for operation in accordance with

instructions in paragraph 1-43.

1-47

Operation Under Unusual Conditions.

1-48

Operation in Extreme Cold.

(A) Lubricate the test stand in accordance with the lubricat-

ion chart.

(B) Keep the electrolyte at the proper level in the battery,

and the battery fully charged.

If water is added to the

battery, run the engine long enough to thoroughly charge

the battery.

(C) Close engine compartment doors as required to maintain

satisfactory engine operating temperature.

(D) Remove oil from the air cleaner and replace with the

proper grade of oil.

Operation in Extreme Heat.

1-49

(A) Locate the test stand in a well ventilated area and keep

all door assemblies open during operation.

(B) Lubricate the test stand in accordance with the lubricat-

ion chart.

(C) Keep the engine shrouding, cylinder heads, fins, and the

air opening in the housing free of dirt and obstructions.