Springs - Replace - TM-55-4920-442-13-P0066

TM 55-4920-442-13 & P

3-31. Springs - Replace

3-31

This task covers:

Removal and Installation

INITIAL SETUP

Tools:

Tool Kit, Aircraft Mechanics General NSN 5180-00-323-4692

Personnel Required:

MOS 67

Parts Required:

Cotter Pins

Equipment Condition:

Para. 3-24 Axles and steering assembly removed.

REMOVAL

Remove straight pin and cotter pin from rear end of spring and lower this end of spring.

Remove nut and bolt connecting the front end of the spring to the shackles.

INSTALLATION

Install front end of spring by aligning hole in spring with holes in shackle and installing bolt and nut.

Lift rear end of spring into position and install straight pin and new cotter pin. Bend open end of cotter pin to

secure.

END OF TASK

3-37