|
| |
TM 1-1730-231-13&P
3-26. FILTER - Continued
3-26
D.
INSTALLATION
NOTE
Antiseize tape shall be applied to male threads
prior to installation of elbows. Ensure tape does
not cover the first thread. All connections should
be tightened as necessary to preclude leakage
of hydraulic fluid.
1.
Use antiseize tape, MIL-T-27730, on all hydraulic connections.
2.
Install straight thread elbows (3) into input and output sides of filter.
3.
Position filter, and make sure that flow direction (arrow) is correct. Attach to mounting bracket using four bolts (4).
4.
Connect input and output hydraulic tubing/lines. Install clogging indicator assembly (5).
E.
TEST
Pressurize system and check for leaks at filter. See Chapter 2, Operating Instructions.
END OF TASK
3-34
|
