TM 5-2350-378-23&P
0006
ALL HYDRAULIC FUNCTIONS INOPERATIVE - Continued
h.
Verify pressure is now within limits by having assistant move right-hand SUSPENSION CONTROL lever
to RAISE and EJECTOR CONTROL lever to BACK. Read transducer T-3 hydraulic pressure on the HDC
display (Figure 8, Item 1).
i.
Stop engine; relieve hydraulic pressure.
j.
Manually open ejector inhibit ball valve V23 (Figure 9, Item 1) on the DCV bank. Using LINE UP or LINE
DOWN button (Figure 8, Item 3), select V1 on the HDC display (Figure 8, Item 2). Open V1 on the HDC
display (Figure 8, Item 2) by selecting the CHANGE POSITION button (Figure 8, Item 4) onf the HDC
control box.
1
T00413HDC
Figure 9. Directional Control Valve (DCV) Bank.
CONDITION/INDICATION
Can hydraulic pressure be adjusted to 3,950-4,050 psi (27,235-27,925 kPa)?
DECISION
YES - Go to Step (7).
NO - Replace DCV bank (TM 5-2350-262-20).
