TM 5-2350-378-23&P
0011
EJECTOR DOES NOT EXTEND OR RETRACT - Continued
g.
To test 13L circuit:
(1)
With SPRUNG/UNSPRUNG control valve in SPRUNG mode, actuate right SUSPENSION
CONTROL valve to RAISE position.
(2)
Read transducer T-4 hydraulic pressure on HDC display (Figure 6, Item 1).
1
2
3
4
T00907HDC
Figure 6. Hydraulic Diagnostic Center (HDC) Control Box.
h.
Stop engine; relieve hydraulic pressure.
CONDITION/INDICATION
Is hydraulic pressure between 3,950-4,050 psi (27,235-27,925 kPa)?
DECISION
YES - Go to Step (8).
NO - Go to Step (5).