TM 5-2350-378-23&P
0011
EJECTOR DOES NOT EXTEND OR RETRACT - Continued
STEP
1.
Check for obstructions in bowl area.
Check bowl area for rock or other debris.
CONDITION/INDICATION
Is ejector/bowl area free of obstructions?
DECISION
YES - Go to Step (2).
NO - Remove rocks or other obstructions from bowl area. Verify problem is solved.
STEP
2.
Perform mechanical binding check.
WARNING
Do not operate ejector when personnel are in bowl. Do not work in bowl unless
ejector lock is engaged. Failure to comply may result in severe injury or death to
personnel.
Do not stand or work in bowl area unless ejector lock is engaged. Do not stand in
bowl to observe roller guide travels. Failure to comply may result in severe injury or
death to personnel.
When folding dozer blade, work on blade latches from side of vehicle only. Do not
stand in front of dozer blade while retracting ejector. Failure to comply may result in
severe injury or death to personnel.
a.
Start engine, operate ejector (Figure 1, Item 1) and check for mechanical binding.
b.
Check ejector (Figure 1, Item 1), rollers (Figure 1, Item 3), and ejector hydraulic cylinder
(Figure 1, Item 4) for damage or jamming.
c.
Check that ejector lock (Figure 1, Item 2) is not restricting movement of control lever.
0011-2
03/15/2011Rel(1.8)root(tswp)wpno(T00009)
