TM 5-2350-378-23&P
0010
EJECTOR CREEPS - Continued
1
2
3
4
5
T00809HDC
Figure 8. Hydraulic Diagnostic Center (HDC) Control Box.
f.
Loosen jam nut (Figure 9, Item 1) on ejector relief valve and turn adjusting screw (Figure 9, Item 2)
clockwise (to increase pressure) or counterclockwise (to decrease pressure) until pressure is within limits.
g.
Tighten jam nut (Figure 9, Item 1).
1
2
T00811HDC
Figure 9. Ejector Relief Valve Adjustment.
h.
Stop engine; relieve hydraulic pressure.
i.
Reset all HDC solenoid valves by selecting RESET VALVES button (Figure 8, Item 5) on HDC control
box.