TM 5-2350-378-23&P
0010
EJECTOR CREEPS - Continued
WARNING
Do not operate ejector when personnel are in bowl. Do not work in bowl unless
ejector lock is engaged. Failure to comply may result in severe injury or death to
personnel.
Do not stand or work in bowl area unless ejector lock is engaged. Do not stand in
bowl to observe roller guide travels. Failure to comply may result in severe injury or
death to personnel.
b.
Disable ejector by manually closing the ejector inhibit ball valve V23 (Figure 6, Item 1) on DCV bank.
1
T00808HDC
Figure 6. Directional Control Valve (DCV) Bank.
c.
Using LINE UP or LINE DOWN button (Figure 5, Item 3), select V1 on HDC display (Figure 5, Item 2).
d.
Close V1 on HDC display (Figure 5, Item 2) by selecting CHANGE POSITION button (Figure 5, Item 4)
on HDC control box.
e.
Have assistant start engine and hold EJECTOR CONTROL lever in FORWARD position.
f.
Read transducer T-2 hydraulic pressure on HDC display (Figure 5, Item 1).
g.
Stop engine; relieve hydraulic pressure.
h.
Enable ejector by manually operating ejector inhibit ball valve V23 (Figure 6, Item 1) on DCV bank.
i.
Using LINE UP or LINE DOWN button (Figure 5, Item 3), select V1 on HDC display (Figure 5, Item 2).
j.
Open V1 on HDC display (Figure 5, Item 2) by selecting CHANGE POSITION button (Figure 5, Item 4)
on HDC control box.
