TM 5-2350-378-23&P
0010
EJECTOR CREEPS - Continued
CONDITION/INDICATION
Is control valve linkage adjusted correctly?
DECISION
YES - Go to Step (3).
NO - Adjust control valve linkage.
STEP
3.
Perform ejector control valve leakage test using Hydraulic Diagnostic Center (HDC).
a.
Reset all HDC solenoid valves by selecting RESET VALVES button (Figure 2, Item 1) on HDC control
box.
1
T00804HDC
Figure 2. Directional Control Valve (DCV) Bank.