TM 5-2350-378-23&P
0010
EJECTOR CREEPS - Continued
STEP
1.
Check if ejector creeps on its own.
Observer movement of the ejector with bowl emptied, engine running, and ejector moved halfway
forward.
CONDITION/INDICATION
Does ejector creep on its own?
DECISION
YES - Go to Step (2).
NO - Go to Step (5).
STEP
2.
Check ejector valve linkage.
a.
Stop engine; relieve hydraulic pressure.
b.
Hold a measuring device (Figure 1, Item 1) on the face of ejector control valve (Figure 1, Item 3) on DCV
bank.
c.
Have assistant move EJECTOR CONTROL lever between FORWARD and BACK.
d.
Measure distance plunger (Figure 1, Item 2) travels as lever is moved.
1
2
3
T00803HDC
Figure 1.
Ejector Control Valve Linkage.
e.
The distance of travel should be 9/32 in. (7 mm).
