TM 5-2350-378-23&P
0009
TROUBLESHOOTING PROCEDURES - BUMP STOPS INOPERATIVE - Continued
h.
Read transducer T-11 hydraulic pressure on HDC display (Figure 4, Item 1).
i.
Reset all HDC solenoid valves by selecting RESET VALVES button (Figure 4, Item 5) on HDC control
box.
1
2
3
4
5
T00708HDC
Figure 4. Hydraulic Diagnostic Center (HDC) Control Box.
j.
Stop engine and relieve hydraulic pressure.
CONDITION/INDICATION
Is transducer T-10 or T-11 hydraulic pressure less than 2,500 psi (17,238 kPa)?
DECISION
YES - Verify problem with operator.
NO - Go to Step (7).
