TM 5-2350-378-23&P
0010
EJECTOR CREEPS - Continued
i.
Stop engine and relieve hydraulic pressure.
CONDITION/INDICATION
Is ejector cylinder leaking excessively?
DECISION
YES - Repair or replace ejector cylinder (TM 5-2350-262-20) or replace solenoid valve V1 on primary manifold
as determined by results of ejector cylinder internal leakage test (WP 0035).
NO - Go to Step (9).
STEP
9.
Perform ejector control valve internal leakage test.
Follow ejector control valve leakage test from Step (3).
CONDITION/INDICATION
Is oil leaking excessively past control valve spool?
DECISION
YES - Replace DCV bank (TM 5-2350-262-20).
NO - Verify problem with operator.
END OF WORK PACKAGE
0010-11/12 blank
03/15/2011Rel(1.8)root(tswp)wpno(T00008)
