TM 5-2350-378-23&P
0020
WINCH WILL NOT PULL RATED LOAD - Continued
i.
Using LINE UP or LINE DOWN button (Figure 2, Item 3), select V14 on HDC display (Figure 2, Item 2).
j.
Open V14 on HDC display (Figure 2, Item 2) by selecting CHANGE POSITION button (Figure 2, Item 4)
on HDC control box.
1
2
3
4
5
T01806HDC
Figure 2. Hydraulic Diagnostic Center (HDC) Control Box.
k.
Stop engine; relieve hydraulic pressure.
CONDITION/INDICATION
Is transducer T-1 hydraulic pressure at port VB 1,950-2,050 psi (13,445-14,135 kPa)?
DECISION
YES - Go to Step (3).
NO - Go to Step (2).