TM 5-2350-378-23&P
0020
WINCH WILL NOT PULL RATED LOAD - Continued
c.
Using LINE UP or LINE DOWN button (Figure 4, Item 2), select V1 on HDC display (Figure 4, Item 1).
d.
Close V1 on HDC display (Figure 4, Item 1) by selecting CHANGE POSITION button (Figure 4, Item 3)
on HDC control box.
e.
Select V14 on HDC display (Figure 4, Item 1).
f.
Close V14 on HDC display (Figure 4, Item 1) by selecting CHANGE POSITION button
(Figure 4, Item 3) on HDC control box.
g.
Have assistant start engine and hold WINCH CONTROL in PAY IN position.
1
2
3
4
T01809HDC
Figure 4. Hydraulic Diagnostic Center (HDC) Control Box.
