TM 5-2350-378-23&P
0043
GENERAL HYDRAULIC SYSTEM REPAIR - Continued
CAUTION
Replace or repair parts with nicks, cuts, or scratches. Failure to comply may result in damage
to equipment.
5.
A four-bolt split flange has a flange head that is clamped to a smooth face. The flange head uses a preformed
packing that is squeezed between the head and the face (Figure 5). The face and the end of flange head must
be free of nicks and scratches to seal properly. The packing must also be free of nicks and cuts, or the
connection will leak.
O-RING (PACKING)
PORT FACE
CLAMP HALVES
FLANGE HEAD
T0011HDC
Figure 5. Four-Bolt Split Flange.
END OF TASK
03/15/2011Rel(1.8)root(gen.maintwp)wpno(M00018)
