Filter assemblies - Inspect - TM-55-4920-442-13-P0146

TM 55-4920-442-13 & P

3-77. Filter assemblies - Inspect

3-77

This task covers:

Inspection

INITIAL SETUP

Personnel Required:

MOS 67

Reference:

Figure 1-2 for location of filters.

INSPECTION

1. Check to see if a warning light on the control panel is on indicating excessive differential pressure at any of the three

test stand filters (high pressure, low pressure and fill system).

2. High differential pressure usually indicates a dirty filter element in need of replacement. See para. 3-78, Servicing

Filter Assemblies.

END OF TASK

3-117