Figure 4. Pump Assembly, Exploded View.
(2) Operate the pump, filly extending the ram
(1) Remove the socket (16, figure 5), pin
until pump bypass pressure is reached. Hold pres-
(15), chain (14), and the screw (13) from from
sure against the load not less than fifteen minutes.
cylinder assembly (12).
There should be no apparent settling.
(2) Remove the rise indicator rod (32)
50. CYLINDER AND RAM ASSEMBLY.
from the rise indicator tube assembly (18). Re-
a. Removal. Remove the cylinder and ram as-
move the wingnut (26) that secures the tube to
sembly (paragraph 40).
the indicator collar (27).